ID | Description | # | Source | Cost |
---|---|---|---|---|
1. | Arduino Nano | 1 | gearbest.com | $4.45 |
2. | 16 X 2 Character LCD | 1 | gearbest.com | $4.36 |
3. | 32mm 8 X 8 Single Color Dot Matrix Display | 1 | gearbest.com | $4.22 |
4. | 0.56 inch 4 Digit Seven Segment Display (CC) | 1 | aliexpress.com | $0.42 |
5. | DHT11 Temperature & Humidity Sensor | 1 | gearbest.com | $2.83 |
7. | LM35 Temperature Sensor | 1 | aliexpress.com | $1.21 |
8. | 5mm LED | 6 | ||
9. | 10K Potentiometer | 1 | aliexpress.com | $0.72 |
10. | 5K Trim Pot | 1 | ||
11. | MAX7219 LED Driver IC | 1 | aliexpress.com | $2.10 |
12. | 74HC595 Shift Register IC | 1 | aliexpress.com | $0.52 |
13. | DS1307 RTC IC | 1 | aliexpress.com | $0.16 |
14. | BC547 General Purpose NPN Transistor | 4 | ||
15. | LM7805 5V Linear Regulator IC | 1 | ||
16. | 6mm Tactile Button Switch | 4 | ||
17. | RGB LED (Piranha) Common Anode | 1 | ||
18. | 5V Piezo Buzzer | 1 | ||
19. | CR2032 Coin Cell Battery | 1 | ||
20. | 4 Contact DIP Switch | 1 | ||
21. | 16 Pin IC Base | 1 | ||
22. | 8 Pin IC Base | 1 | ||
23. | 24 Pin IC Base | 1 | ||
24. | Universal Grove Connector | 3 | ||
25. | CR2032 Battery Holder | 3 | ||
26. | Female Pin Header | 4 | ||
27. | Male Pin Header | 1 | ||
28. | 220 Ohm Resistor | 20 | ||
29. | 4.7K Resistor | 6 | ||
30. | 100 Ohm Resistor | 1 | ||
31. | 10K Ohm Resistor | 5 | ||
32. | 4.5 X 5 inch double-sided copper clad board | 1 | gearbest.com | $4.98 |
Total of prices listed $25.95
Instructables (Home)
Instructables: Arduino Learner Kit
Instructables: How to Order Cheap Custom PCB Online at JLCPCB
JLCPCB: Custom PCBs Made Simple
The size of the board is around 5 inch X 4 inch. (12.7 cm x 10.6 cm)
board.dri
The DRI file type is primarily associated with Speedy Printed Circuit Board Design Software by Mania Technologies.
board.GLB
Gerber format files, like GBL, act similar to .PDF files. They're an exported version of the
PCB layout and are meant to be viewed and referenced but not edited.
board.GBO
The GBO file acts similar to a .PDF file. It is an exported version of the PCB layout and
is meant to be viewed and referenced but not edited.
board.GBS
File created by Generic Build Support (GBS), a build automation system that helps users develop
software projects; contains data referenced by the GBS application that specifies different
functions within the application, such as where files are exported or the general settings
for system generation.
board.GML
GML files are used to create game scripts, functions, or modules.
board.gpi
board.GTL
board.GTO
board.GTP
board.GTS
board.txt